Whether you’re dealing with everyday wear and tear or tough stains from spills and pets, having a good carpet cleaner can make maintaining your carpets much easier. But with so many options on the market, how do you choose the right one? This guide will walk you through what to look for in a carpet cleaner, how to use a Bissell carpet cleaner, where to rent one, the costs of carpet cleaning, and tips on using any carpet cleaner effectively.
Choosing a Good Carpet Cleaner
A good carpet cleaner should have a combination of power, ease of use, and appropriate attachments for various cleaning needs. Here are a few features to consider:
- Powerful Suction: Good carpet cleaners should offer strong suction to effectively remove dirt and moisture from the carpet fibers.
- Heating Capabilities: Machines with built-in heaters help to improve cleaning performance by heating water to a temperature that breaks down stains more effectively.
- Attachments: Look for cleaners with attachments for treating stairs, upholstery, and hard-to-reach areas.
- Ease of Use: Lightweight models or those with easy maneuverability are preferred.
- Reputation: Brands like Bissell, Hoover, and Rug Doctor have solid reputations for durability and effectiveness in carpet cleaning.
Detailed Guide: How to Use a Bissell Carpet Cleaner
Bissell carpet cleaners are a favorite choice for homeowners due to their effective cleaning capabilities and user-friendly design. To get the most out of your Bissell carpet cleaner, follow these detailed steps:
1. Preparation
- Vacuuming: Start by thoroughly vacuuming the area you plan to clean. This step is crucial as it removes surface dirt, dust, and pet hair that can clog the carpet cleaner. Pay extra attention to high-traffic areas and edges where dirt accumulates.
- Move Furniture: If possible, remove furniture from the room or place it on coasters or blocks to avoid getting it wet during the cleaning process. This also ensures you can clean the carpet uniformly without missing spots underneath furniture.
- Spot Treatment: For tough stains, pre-treat them with a stain remover before using the carpet cleaner. Bissell often provides a recommended pre-treatment solution that is effective against common household stains.
2. Setup
- Filling the Water Tank: Remove the tank from the unit and fill it with hot tap water. The hotter the water, the more effective it will be in breaking down oily and greasy stains.
- Adding Cleaning Solution: Add the appropriate amount of Bissell cleaning solution to the water. Be sure to follow the instructions on the solution’s label to avoid using too much or too little, which could affect cleaning efficiency or leave residue.
- Reattach the Tank: Place the tank back into the carpet cleaner, ensuring it is securely locked in place to prevent leaks.
3. Cleaning
- Starting the Machine: Turn on the cleaner and wait for it to get ready if there is a ready indicator. Some models heat the water further or need a moment to start pumping the solution.
- Cleaning Strokes: Slowly push the cleaner forward while pressing the trigger to release the cleaning solution. Pull the cleaner back towards you with the trigger still pressed. This method ensures that the carpet is cleaned thoroughly.
- Overlap Strokes: Overlap your passes by about one-third with each new stroke to ensure complete coverage and avoid missing spots. This is particularly important in high-traffic areas or on heavily soiled carpets.
- Edge Cleaning: Use the attachments provided with your Bissell cleaner to clean edges and corners where the main unit can’t reach effectively.
4. Drying
- Removing Excess Moisture: After you’ve cleaned the carpet, make several dry passes—moving the cleaner over the carpet without pressing the trigger—to suck up excess water.
- Ventilation: Open windows and use fans to circulate air and speed up drying. Dehumidifiers can also help in humid climates.
- Avoid Traffic: Try to keep foot traffic off the carpet until it is completely dry to avoid re-soiling and to allow the fibers to dry undisturbed.
Tips for Maintaining Your Bissell Carpet Cleaner
- Clean the Machine After Use: Rinse out the tank and clean the brushes and nozzles to remove any residue or build-up. This helps keep the machine in good working order and ready for the next use.
- Regular Maintenance: Check the filters and replace them as necessary. Regular maintenance ensures optimal cleaning performance and longevity of your machine.
Where to Rent a Carpet Cleaner
If you don’t want to buy a carpet cleaner, renting one is a cost-effective alternative. You can rent carpet cleaners from:
- Hardware stores like Home Depot or Lowe’s.
- Grocery stores often have rental kiosks.
- Specialized rental centers like Rug Doctor rental locations.
Rental fees typically range from $30 to $50 per day, depending on the model and rental duration.
The cost of professional carpet cleaning services can vary widely based on a range of factors, including the method used, the size and condition of the carpet, the geographical location, and the company’s pricing structure. Understanding these variables can help you anticipate the expenses and choose the best service for your needs.
Factors Influencing Carpet Cleaning Costs
1. Cleaning Method: There are several cleaning methods professionals might use, each affecting the cost differently:
- Hot Water Extraction (Steam Cleaning): This is one of the most common methods. It involves injecting hot water and cleaning solution into the carpet and then extracting it along with the dissolved dirt. It’s effective for deep cleaning but can be pricier due to the equipment and labor involved.
- Dry Cleaning: This method uses no water but a special powder that absorbs dirt, which is then vacuumed up. It’s faster than steam cleaning and can be less disruptive, but might not remove deep-seated dirt as effectively.
- Shampooing: Less commonly used today, this method involves scrubbing the carpet with a foamy chemical that attracts and encapsulates dirt. It can leave residues if not properly rinsed, which might attract more dirt over time.
- Encapsulation: This relatively new technique uses chemicals that crystallize dirt particles, which are then vacuumed up. It’s fast, efficient, and leaves less moisture in the carpet.
2. Size of the Area:
- Per Room Rates: Many companies charge per room, which can be an economical choice for smaller homes or those needing only certain areas cleaned. Prices might range from $25 to $75 per room, depending on size limits set by the company.
- Per Square Foot: This pricing model is often used for larger or custom-shaped areas and is particularly common in commercial carpet cleaning. Rates might range from $0.20 to $0.50 per square foot.
3. Carpet Condition:
- Stain Removal: Heavily stained or soiled carpets require more time, effort, and chemicals to clean, which can increase the price.
- Pet Odors and Stains: Special treatments to neutralize odors and remove pet stains can add to the cost.
4. Additional Services:
- Scotchgard Application: Applying a protective coating to guard against stains and dirt accumulation might incur additional charges.
- Carpet Repair: Some companies offer minor carpet repairs, which would add to the total cost of cleaning.
- Moving Furniture: If the cleaning company needs to move furniture before cleaning the carpet, they may charge extra for this service.
5. Geographic Location: Prices can also vary significantly depending on your location. Urban areas and regions with a higher cost of living typically see higher prices for carpet cleaning services.
Typical Pricing Examples
To give you a better idea, here are some hypothetical scenarios:
- Standard Home: For an average three-bedroom home with carpets in all bedrooms, a living room, and a hallway — typically around 1,000 square feet in total — might cost between $200 to $300 for steam cleaning.
- Apartment: A smaller two-bedroom apartment might cost between $80 to $150, depending on the number of rooms and whether there are hallways or large common areas.
- Commercial Space: For commercial spaces, such as offices, the per square foot model will generally apply, potentially lowering the cost per unit area but increasing the total due to the larger size.
How to Use a Carpet Cleaner
Using a carpet cleaner effectively involves a few key steps:
- Pre-treat stains using a spot treatment spray to loosen tough stains before using the carpet cleaner.
- Fill the machine with the correct water and cleaning solution as directed.
- Clean in sections, focusing on one small area at a time and using overlapping strokes.
- Rinse, if your machine has this function, to remove any soap residue that could attract dirt later.
- Dry the carpet thoroughly by making several dry passes and using fans or dehumidifiers to speed up the process.
Conclusion
A good carpet cleaner is an investment in the cleanliness and longevity of your carpets. Whether you choose to buy, rent, or hire professional services, understanding how to use and maintain your carpet cleaner will ensure the best results, keeping your home clean and fresh.